Bosch ICP-EZM2 Easy Series System Reference Manual page 45

Easy series
Hide thumbs Also See for ICP-EZM2 Easy Series:
Table of Contents

Advertisement

Easy Series
Programming Item
Test Report Day of Month
Clear Confirmed Alarm Memory
Arming Beeps/Graduated
Annunciation
Wireless Jam Detect Level
Key Fob Arming
Two-Way Voice Session Configuration 158
Start Arming with Faulted Points
Speak Active Faults
Wireless Transmission Attenuation
Missing Wireless Device Conditions
Silence Trouble Tones
System Inactivity Time (Hours)
System Inactivity Time (Days)
System Inactivity Time (Weeks)
Force Arm/Exit Error
Bosch Security Systems, Inc.
Item
Selections
Number
146
1 to 28
147
0 = User can clear a confirmed alarm
1 = Only the installer can clear a confirmed alarm
148
0 = No arming beeps or outputs during Entry Delay
1 = Outputs activate during Entry Delay, but no
arming beeps occur.
2 = Sound arming beeps, but outputs do not
activate during Entry Delay
3 = Sound arming beeps, and outputs activate
during Entry Delay
150
0 to 15
153
0 = Do not turn system on if there are faulted points
1 = Force arm faulted points if the number of
faulted points is within the range set in Expert
Programming Item Number 125
2 = Force arm faulted points even if the number of
faulted points exceeds the range set in Expert
Programming Item Number 125
0 = Allow at any time
1 = Allow only during alarm conditions
159
0 = Force arm all faulted points
1 = Exit Delay starts with faulted points
160
0 = "Call for Service" announced
1 = Fault condition announced
161
Temporary attenuation for installation and
maintenance only. Not intended for normal
operation.
0 = None (normal operation)
1 = 3 dB
2 = 6 dB
3 = 9 dB
4 = 12 dB
162
0 = Creates a tamper condition (required for
EN50131-compliant countries).
1 = Creates a trouble condition.
163
0 = All trouble tones announced
1 = Fire and 24-Hour trouble tones announced
164
0 to 255
165
0 to 255
166
0 to 255
167
0 = Off-normal points create an Exit Error at the end
of Exit Delay
1 = Off-normal points are force armed at the end of
Exit Delay
System Reference Guide
Programming | en
45
Manuf.
Default
1
0
0
12
0
0
1
0
0
0
0
0
0
0
0
F01U087835 | 02 | 2008.10

Advertisement

Table of Contents
loading

Table of Contents