Easy Series
5.2.10
Factory Default
Programming Item
Factory Default
WARNING!
!
For NF A2P installations, once the panel is configured, check that all parameters are within the
range of authorized values. Refer to Section 12.7 EN50131 Requirements, page 119
5.3
Exit Programming
Press [#] repeatedly until the system says "goodbye." This ends the phone session.
Bosch Security Systems, Inc.
Item
Selections
Number
9999
Enter 9999 to restore all factory default values. All programming items,
except for the country code, are reset when you restore the factory default
values. This item also deletes all wireless data, but does not default the
wireless hub.
System Reference Guide
Programming | en
57
.
F01U087835 | 02 | 2008.10