REAR SHOCK ABSORBER ASSEMBLYAND SWINGARM
2
3
1
∫
å
7-51
http://www.motorcycle.in.th
5. Remove:
9 rear shock absorber bolt (upper and lower)
1
9 washer
9 rear shock absorber nut (upper and lower)
2
9 washers
9 rear shock absorber assembly 3
6. Measure:
9 swingarm side play
9 swingarm vertical movement
a. Measure the tightening torque of the
swingarm pivot shaft nut.
Pivot shaft nut
66 Nm (6.6 m·kg, 43 ft·lb)
b. Measure the swingarm side play å by mov-
ing the swingarm from side to side.
c. If the swingarm side play is out of specifica-
tion, check the spacers and bearings.
Swingarm side play (at the end of
the swingarm)
1 mm (0.04 in)
d. Check the swingarm vertical movement
by moving the swingarm up and down.
If swingarm vertical movement is not
smooth or if there is binding, check the
washer and bushings.
CHAS
∫