Yamaha T135SE Service Manual page 224

B/LLY
2
3
1
B/LLY
4
3
CARBURETOR
c. Connect the pocket tester (DC20V) to the
terminals of the throttle position sensor.
Positive (+) pocket tester probe
yellow terminal
Negative (-) pocket tester probe
black/blue terminal
Throttle position sensor input volt-
age
5V at 20 ° C
(yellow-black/blue)
2. Adjust:
9 throttle position sensor angle
a. Connect the digital circuit tester to the throt-
tle position sensor 1 .
Positive (+) digital circuit tester probe
blue terminal
Negative (-) digital circuit tester probe
yellow terminal
Digital circuit tester
90890-03174
b. Measure the throttle position sensor voltage.
c. Adjust the throttle position sensor angle so
that the voltage is within the specified range.
Throttle position sensor voltage
0.5 V (blue-yellow)
d. After adjusting the throttle position sensor
angle, tighten the throttle position sensor
screws.
6-12
http://www.motorcycle.in.th
CARB
→→
33
→→
22
44
33
→→
→→