Yamaha T135SE Service Manual page 266

FRONT FORK
NOTE:
Tighten the damper rod assembly bolt
holding the damper rod with the T-handle 2 and
a 10 mm hexagon nut/socket wrench 3 .
T-handle
90890-01326
4. Install:
9 oil seal 1
(with the fork seal driver weight 2 and fork
seal driver attachment 3 )
Fork seal driver weight
90890-01184
Fork seal driver attachment
90890-01186
cC
Make sure the numbered side of the oil seal
faces up.
NOTE:
9 Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
9 Lubricate the outer surface of the inner tube
with fork oil.
9 Before installing the oil seal, cover the top of
the front fork leg with a plastic bag 4 to protect
the oil seal during installation.
5. Install:
9 oil seal clip 1
NOTE:
Adjust the oil seal clip so that it fits into the outer
tube's groove.
7-36
http://www.motorcycle.in.th
CHAS
1 while