Configuring And Displaying Fast And Giga Ethernet Ports - Nokia ESB26 User Manual

5.
Port's PVID
Remote fault detect
Crossover detection
Port management
Configuring and Displaying Fast and Giga Ethernet
Ports
Interface Configuration Commands
Table 5-2 lists the Fast and Giga Ethernet Ports configuration commands.
Table 5-2 Fast and Giga Ethernet Configuration Commands
C o m m a n d
interface
shutdown
name
duplex-speed
backpressure
flow control
default vlan
remote-fault-detect
crossover
Accessing the Interface Configuration Mode
The interface command, in Global Configuration mode or Interface Configuration mode,
enables configuration of a specific physical interface.
MN700004 Rev 01
Ethernet Interface Configuration
1
Disabled
Automatic
Enable
D e s c r i p t i o n
Enables configuration of a specific physical interface.
Disables the interface (to receive, forward and learn).
Assigns a name to the Fast Ethernet or Giga Ethernet port to facilitate
switch administration.
Specifies the port speed.
Changes the backpressure mode.
Changes the flow control mode.
Changes the default VLAN (PVID) of the configured interface.
Enables remote fault detection on the configured interface that is
connected to a 100Base Fiber pair. (Not relevant for ESB26.)
Enables crossover
automatically detect transmit and receive of the Ethernet cable (i.e.,
the type of the cable is irrelevant).
32
detection which allows the switch port to