19.
DHCP Client
Configuration Example
Figure 19-3 shows a simple network diagram of a DHCP client on an Ethernet LAN.
Figure 19-3 Topology Showing DHCP Client with Ethernet Interface
1. The following command enables DHCP client configuration:
device-name(config)#ip address dhcp
2. The following command displays the DHCP Client Configuration:
device-name(config)#exit
device-name#show dhcp-client
DHCP client is active
IP address is acquired by DHCP
DISCOVER messages retransmission timeout - 1 minute(s)
Lease time left: 35
MN700004 Rev 01
242