17.
Virtual LANs (VLANs)
show vlan dynamic
The show vlan dynamic command, in Privileged (Enable) mode, displays information
regarding the dynamic VLANs learned by the GVRP.
Command Syntax
device-name#show vlan dynamic
Commands to Configure VLAN Settings
BiNOS allows you to configure 802.1Q-compatible VLANs. Compatibility with the 802.1Q
standard lets you assign a single switch port to two or more VLANs, while still allowing for
interfacing with older switches that require a separate port for each VLAN.
An example of three VLANs on one switch is shown in Figure 17-2.
Figure 17-2 Three VLANs on One Switch
MN700004 Rev 01
198