Nokia ESB26 User Manual page 416

Verifying validity of primary application.....OK
Start primary application...
BUILT-IN SELF TEST
------------------
CPU Core Test
CPU Notify RAM Test
CPU Interface Test
Testing Switch Core
/////////////////////////////////////////////////////////////////////
//
//
// N O K I A
//
//
//
// Switch model : NOKIA ESB26
//
// SW version
//
//
//
/////////////////////////////////////////////////////////////////////
User Access Verification
Password:
download application
The download application command, in Sysloader mode, copies the application from a
source computer to the switch's permanent storage memory, through a console connection by
X-modem transfer.
When you set the download command on the console, the switch waits for a file transfer.
The transfer starts in an X-modem format.
Upon completion of the transfer, the switch checks if the received file is a valid switch
application code. If it is, the received image is stored in the internal FLASH memory.
This role of the download application command is to provide a rescue solution in case the
switch becomes inoperable and there is no possibility to start either primary or secondary
application.
Command Syntax
device name>download (primary|secondary|leave-primary-sw) application
Argument Description
primary Downloads the image to the first flash
secondary Downloads the image to the secondary flash
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
: Passed
: Passed
: Passed
: Passed
: 3.4.2 beta BG created Jan
XI
8 2004 - 16:10:06
//
//
//
//
//
//
//
//
//
//
//
//