Nokia ESB26 User Manual page 407

quit Disconnects and logs out.
start Starts execution of switch application.
copy Files transfer to the target base.
version Displays the switch's model and loader version.
manufacturing- Displays manufacture details.
details
Table APPENDIX-2 Configuration Mode Commands
more Filters command output.
mac-address Sets MAC address of switch.
clean Rough-cleans the NVRAM database.
end Ends current mode and change to enable mode.
exit Exits current mode and down to previous mode.
help Descriptions of the interactive help system.
ip-address Configures IP address of the loader. (Used for manufacturing purposes only.)
list Prints command list.
manufacturing- Configures manufacture details.
details
quit Disconnects and logs out.
Table APPENDIX-3 Board Configuration Commands
more Filters command output
assembly- Configures the assembly part of the manufacturing serial number
number
board-revision Configures the board revision part of the manufacturing serial number
board-sub- Configures the of the board sub-revision part of the manufacturing serial number
revision
clear Clearя details about board manufacturing
end Ends current mode and change to initial mode.
exit Exits current mode and down to previous mode
help Descriptions of the interactive help system
list Prints command list
quit Disconnects and logs out.
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
II