18.
Table 18-3 Default Priority to Queue Assignment
Q u e u e
P r i o r i t y
7
7
6
6
4
4
3
3
2
2
1
1
0
0
Configuring Quality of Service Features
To set the QoS, proceed as follows:
•
To configure mapping of the 802.1p priroity levels to internal transmit queue values,
see "Configuring Priority Value Mapping to QoS Queues".
•
To configure re-marking of the internal transmit queue values to 802.1p priroity
levels, see "Replacing 802.1p Priority Information in Transmitted Packets".
•
To override priorty on the incoming traffic per port, see "Replacing 802.1p Priority
Information on a Port".
•
To set QoS priority manually per destination MAC address, see "Setting the
Destination MAC Address Priority".
•
To override QoS scheduling algorithm settings, see "QoS Scheduling Commands".
•
To set traffic shaping see "Configuring Traffic Shaping".
QoS Priority Mapping Commands
Table 18-4 lists the commands to configure and display the QoS priority mapping commands.
Table 18-4 Priority Mapping Commands
C o m m a n d
qos map
MN700004 Rev 01
Quality of Service
D e s c r i p t i o n
Assigns 802.1p priority level to the Transmit-Queue mapping.
218