Rmon Alarms - Nokia ESB26 User Manual

26.
octets
collisions
broadcast
multicast
crcalignerrors
undersize
oversize
fragments
dropevents
-- more --

RMON Alarms

Using CLI commands, the network administrator can define specific alarms indicating that
some counters have passed the critical threshold. In this case, the switch sends trap that can be
displayed in the network management platforms such as HP OV or SNMPc. To define these
kinds of events, perform the following steps:
Step 1. Define the trap destination.
Step 2. Define event descriptions.
Step 3. Define alarm conditions.
Step 4. View RMON definitions in configuration list.
Defining and Viewing Event Descriptions
rmon event
The rmon event command, in Global Configuration mode, defines RMON event
descriptions. The no form of this command removes the specified event. If no event-index is
specified, all existing RMON events are removed.
Command Syntax
device-name(config)#rmon event <event-index> DESCRIPTION
{none|log|snmp-trap|trap-and-log} COMM OWNER
device-name(config)#no rmon event [<event-index>]
Argument Description
event-index Event index in the range <1-65535>.
If the index is new - event descriptions are created. If the index already exists -
event descriptions are updated.
DESCRIPTION Event description, without spaces.
MN700004 Rev 01
Remote Monitoring
9048 jabbers
0 pkts
0 pkts <=64
0 pkts 65-127
0 pkts 128-255
0 pkts 256-511
0 pkts 512-1023
0 pkts 1024-1518
0
307
0
57
39
22
12
10
0
0