Enable Password - Nokia ESB26 User Manual

25. Status Monitoring, Statistics and General Commands
Command Syntax
device-name(config)#password PASSWORD PASS_CONFIRM
Argument Description
PASSWORD
PASS_CONFIRM
Example
device-name(config)#password switch123 switch123

enable password

The enable password command, in Global Configuration mode, sets a password to access
Privileged mode from View mode. The no form of this command resets the default state. By
default, no password is required to access Privileged mode.
When a password is set by the enable password command, a prompt for the password is
issued in response to the enable command in View mode.
Command Syntax
device-name(config)#enable password PASSWORD
device-name(config)#no enable password
Argument Description
PASSWORD
PASS_CONFIRM
Example
device-name(config)#enable password switch123enable switch123enable
...
device-name>enable
Password: switch123enable
Banner, Hostname and Service Commands
NOTE
The banner commands will take effect only after reloading the switch.
MN700004 Rev 01
A character string without blank spaces.
Confirm password string
A character string without blank spaces.
Confirm password string
292
PASS_CONFIRM