Download Application - Nokia ESB26 User Manual

//////////////////////////////////////////////////////////////
//
// Switch model : NOKIA ESB26
// SW version
//
//////////////////////////////////////////////////////////////
User Access Verification
Password:

download application

The download application command, in Loader mode, copies the switch's application from a
source computer to the switch's permanent storage memory, through a console connection by
X-modem transfer.
When you type the download command on the console, the switch waits for a file transfer and
periodically sends NAKs (negative acknowledgments) to the console. These appear on the
console screen as garbage characters.
The transfer starts in an X-modem format.
Upon completion of the transfer, the switch checks if the received file is a valid switch
application code. If it is, the received image is stored in the internal FLASH memory.
This role of the download command is to provide a rescue solution in case the switch
becomes inoperable and a new application image cannot be received by the TFTP transfer.
Command Syntax
Loader>download application
Example
Loader>download application
XMODEM application download to flash 0
XMODEM Receive: Waiting for Sender
Image Size = 0xBD552 CRC Value = 0x691181F3
Saving application code to FLASH bank 0....Success.
Loader>
manufacturing details
The manufacturing-details command, in Loader mode, displays manufacture details.
Command Syntax
Loader>manufacturing-details
Example
Loader>manufacturing-details
Serial number : 13456 9
Assembly No : 1234567
HW revision : 123
HW subrevision : 123
Loader>
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
: 3.3.0 created Oct 21 2003 - 14:59:16
IV
//
//
//
//