Denial Of Service Protection; Figure 26: Denial Of Service; Table 19: Denial Of Service Configuration Fields - D-Link DWS-4026 User Manual

Dws-4000 series unified wired & wireless access system
Table of Contents

Advertisement

D-Link Unified Access System
D
S
ENIAL OF
ERVICE
Use the Denial of Service (DoS) page to configure DoS control. D-Link software provides support for classifying and blocking
specific types of DoS attacks. You can configure your system to monitor and block these types of attacks:
SIP=DIP: Source IP address = Destination IP address.
First Fragment: TCP Header size smaller then configured value.
TCP Fragment: IP Fragment Offset = 1.
TCP Flag: TCP Flag SYN set and Source Port < 1024 or TCP Control Flags = 0 and TCP Sequence Number = 0 or
TCP Flags FIN, URG, and PSH set and TCP Sequence Number = 0 or TCP Flags SYN and FIN set.
L4 Port: Source TCP/UDP Port = Destination TCP/UDP Port.
ICMP: Limiting the size of ICMP Ping packets.
To access the Denial of Service page, click LAN > Administration > Denial of Service Protection in the navigation menu.
Field
Denial of Service First
Fragment
Denial of Service Min TCP Hdr
Size
Denial of Service ICMP
Page 78

Denial of Service Protection

P
ROTECTION

Figure 26: Denial of Service

Table 19: Denial of Service Configuration Fields

Description
Enable or disable this option by selecting the corresponding line on the pulldown entry
field. Enabling First Fragment DoS prevention causes the switch to drop packets that
have a TCP header smaller then the configured Min TCP Hdr Size. The factory default
is disabled.
Specify the Min TCP Hdr Size allowed. If First Fragment DoS prevention is enabled,
the switch will drop packets that have a TCP header smaller then this configured Min
TCP Hdr Size. The factory default is disabled.
Enable or disable this option by selecting the corresponding line on the pulldown entry
field. Enabling ICMP DoS prevention causes the switch to drop ICMP packets that
have a type set to ECHO_REQ (ping) and a size greater than the configured ICMP Pkt
Size. The factory default is disabled.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600apDws-4000 series

Table of Contents