Port Description; Multiple Port Mirroring; Figure 55: Port Description; Table 45: Port Description Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
P D
ORT ESCRIPTION
Use the Port Description page to configure a human-readable description of the port.
To access the Port Description page, click LAN >Administration > Port Configuration > Port Description in the
navigation tree.
Field
Slot/Port

Port Description

Slot/Port
Physical Address
PortList Bit Offset
IfIndex
Port Description
• If you change a port description, click Submit to apply the change to the system.
• Click Refresh to display the page with the latest information from the router.
M P
ULTIPLE ORT
M P M
ULTIPLE ORT IRRORING
Port mirroring selects the network traffic for analysis by a network analyzer. This is done for specific ports of the switch. As
such, many switch ports are configured as source ports and one switch port is configured as a destination port. You have
the ability to configure how traffic is mirrored on a source port. Packets that are received on the source port, that are
transmitted on a port, or are both received and transmitted, can be mirrored to the destination port.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 55: Port Description

Table 45: Port Description Fields

Description
Select the interface for which data is to be displayed or configured.
Enter text to describe a port. It can be up to 64 characters in length. The description
can contain spaces and non-alphanumeric characters.
Identifies the port.
Displays the physical address of the specified interface.
Displays the bit offset value which corresponds to the port when the MIB object type
PortList is used to manage in SNMP.
Displays the interface index associated with the port.
Shows the configured port description. By default, the port does not have an
associated description.
M
IRRORING
D-Link Unified Access System

Multiple Port Mirroring

Page 115