D-Link DWS-4026 User Manual page 428

D-Link Unified Access System
Field
RADIUS Authentication
Server Name
RADIUS Authentication
Server Status
RADIUS Accounting
Server Name
RADIUS Accounting
Server Status
RADIUS Use Network
Configuration
RADIUS Accounting
Security
Page 428 Basic Setup
Table 263: Wireless Network Configuration (Cont.)
Description
Enter the name of the RADIUS server that the VAP uses for AP and client authentications.
The name can contain up to 32 alphanumeric characters. Spaces, underscores, and dashes
are also permitted.
Any RADIUS information you configure for the wireless network overrides the global RADIUS
information configured on the Wireless Global Configuration page.
The switch acts as the RADIUS client and performs all RADIUS transactions on behalf of the
APs and wireless clients.
Indicates whether the RADIUS authentication server is configured for the VAP. To configure
RADIUS server information, go to the LAN > Security > RADIUS > Server Configuration
page.
Enter the name of the RADIUS server that the VAP uses for reporting wireless client
associations and disassociations. The name can contain up to 32 alphanumeric characters.
Spaces, underscores, and dashes are also permitted.
Any RADIUS information you configure for the wireless network overrides the global RADIUS
information configured on the Wireless Global Configuration page.
Indicates whether the RADIUS accounting server is configured. To configure RADIUS
accounting server information, go to LAN > Security > RADIUS > Accounting Server
Configuration.
This field controls whether the VAP uses the network RADIUS settings or the global RADIUS
settings.
• Enable: Use RADIUS Servers defined on the Wireless Network Configuration page.
• Disable: Use RADIUS servers defined on the Wireless Global Configuration page.
Select this option to enable RADIUS accounting for wireless clients.
The default AP profile does not use any security mechanism by default. In order to protect your
network, D-Link strongly recommends that you select a security mechanism so that
unauthorized wireless clients cannot gain access to your network.
The following WLAN network security options are available:
• None
• WEP
• WPA/WPA2
• WPA Personal
• WPA Enterprise
If you select WEP or WPA/WPA2 as your security mechanism, a dialogue box asks if you want
to change network security. After you click OK, additional fields appear, and any network
settings that you modified are applied to the switch.
"Configuring AP Security" on page 431
fields you can configure if you select WEP or WPA/WPA2.
Software User Manual
describes the security mechanisms and the additional
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09