Viewing The Peer Switch Configuration Received Status; Figure 313: Wireless Discovery Status; Figure 314: Configuration Received - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
The status is in one of the following states:
• Not Polled: The switch has not attempted to contact the IP address in the L3/IP Discovery list.
• Polled: The switch has attempted to contact the IP address.
• Discovered: The switch contacted the peer switch or the AP in the L3/IP Discovery list and has authenticated or
validated the device.
• Discovered - Failed: The switch contacted the peer switch or the AP with IP address in the L3/IP Discovery list and
was unable to authenticate or validate the device.
If the device is an access point, an entry appears in the AP failure list with a failure reason.

Viewing the Peer Switch Configuration Received Status

The Peer Switch Configuration feature allows you to send the critical wireless configuration from one switch to all other
switches. In addition to keeping the switches synchronized, this function enables the administrator to manage all wireless
switches in the cluster from one switch. The Peer Switch Configuration Received Status page provides information about
the configuration a switch has received from one of its peers.
Table 276 on page 453 describes the fields on the Wireless Global Status page.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 313: Wireless Discovery Status

Figure 314: Configuration Received

D-Link Unified Access System
Monitoring Status and Statistics Page 457