D-Link DWS-4026 User Manual page 465

Software User Manual
12/10/09
Field
Configuration Status
Configuration Failure
Error Message
Configuration Failure
Element
Vendor ID
Part Number
Hardware Type
Managing Switch
Switch MAC Address
Switch IP Address
Profile
Discovery Reason
Protocol Version
Authenticated Clients
System Up Time
Age
Document 34CSFP6XXUWS-SWUM100-D7
Table 283: Detailed Managed Access Point Status (Cont.)
Description
Indicates whether the AP is configured successfully with the assigned profile. The status is
one of the following:
• Not Configured: The profile has not been sent to the AP yet, the AP may be discovered but
not yet authenticated.
• In Progress: The switch is currently sending the AP profile configuration packet to the AP.
• Success: The entire profile has been sent to the AP and there were no configuration errors.
• Partial Success: The entire profile has been sent to the AP and there were configuration
errors, but the AP is operational.
• Failure: The profile has been sent to the AP and there were configuration errors, the AP is
not operational.
This field appears if the configuration status indicates a partial or complete failure. The field
provides information about the last element that failed during configuration. The field shows
an ASCII string filled in by the AP containing the error message for the last failing configuration
element. I
This field appears if the configuration status indicates a partial success or failure. It shows the
element ID of the last failing configuration element.
Vendor of the AP software, this is learned from the AP during discovery.
Hardware part number for the AP, which is learned from the AP during discovery.
Hardware platform for the AP, which is learned from the AP during discovery.
Indicates whether the AP is managed by the local switch or a peer switch.
Identifies the MAC address of the switch that is managing the AP.
Identifies the IP address of the switch that is managing the AP.
The AP profile configuration currently applied to the managed AP, the profile is assigned to
the AP in the valid AP database.
Note: Once an AP is discovered and managed by the Unified Switch, if the profile is
changed in the valid AP database (either locally or on the RADIUS server) the AP must be
reset to configure with the new profile.
This status value indicates how the managed AP was discovered, the status is one of the
following values:
• IP Poll Received: The AP was discovered via an IP poll from the Unified Switch, its IP address
is configured in the IP polling list.
• Peer Redirect: The AP was discovered through a peer switch redirect, the AP tried to
associate with another peer switch and learned the current Unified Switch IP address from
the peer (peer learned Unified Switch IP address in RADIUS server response when validating
the AP).
• Switch IP Configured: The managed AP is configured with the Unified Switch IP address.
• Switch IP DHCP: The managed AP learned the current DWL-8600AP IP address through
DHCP option 43.
• L2 Poll Received: The AP was discovered through the D-Link Wireless Device Discovery
protocol.
Indicates the protocol version supported by the software on the AP, which is learned from the
AP during discovery.
Total number of clients currently associated to the AP that have been authenticated. This is
the sum of all authenticated clients for all the VAPs enabled on the AP.
Time in seconds since last power-on reset of the managed AP.
Time since last communication between the Unified Switch and the AP.
D-Link Unified Access System
Monitoring Status and Statistics Page 465