Summer Time Recurring Configuration; Figure 49: Summer Time Recurring Configuration; Table 39: Summer Time Recurring Configuration Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
End Time
Offset
Zone
• If you change any of the settings on the page, click Submit to apply the changes to system.

Summer Time Recurring Configuration

Clicking the Recurring check box indicates that the configuration is to be repeated every year. When you select Recurring,
the fields shown in the following table occur.
Field
Summertime
Recurring
Location
Offset
Zone
Page 104 Configuring SNTP Settings
Table 38: Summer Time Configuration Fields (Cont.)
Description
Select the ending time in hh:mm format.
Set the number of minutes to add during summer time in the range 0 to 1440.
Set the acronym of the time zone to be displayed when summer time is in effect. The
range is 0 to 4 characters.

Figure 49: Summer Time Recurring Configuration

Table 39: Summer Time Recurring Configuration Fields

Description
Enable or disable summer time mode.
Select the check box to indicate that the configuration is to be repeated every year.
This field displays only when the Recurring check box is selected. The summer time
configuration is predefined for the United States and European Union. To set the
summer time for a location other than the USA or EU, select None.
Set the number of minutes to add during summer time in the range 0 to 1440.
Set the acronym of the time zone to be displayed when summer time is in effect. The
range is 0 to 4 characters.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09