Port Configuration; Figure 273: Port Access Control Port Configuration; Table 243: Port Access Control Port Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
P C
ORT ONFIGURATION
Use the Port Access Control Port Configuration page to enable and configure port access control on one or more ports.
To access the Port Based Access Control Port Configuration page, click LAN > Security > Port Access Control > Port
Configuration in the navigation menu.
Field
Port
Control Mode
Quiet Period (secs)
Document 34CSFP6XXUWS-SWUM100-D7

Figure 273: Port Access Control Port Configuration

Table 243: Port Access Control Port Configuration Fields

Description
Selects the Port to configure.
Defines the port authorization state. The control mode is only set if the link status of
the port is link up. The possible field values are:
• Auto: Automatically detects the mode of the interface.
• Force Authorized: Places the interface into an authorized state without being
authenticated. The interface sends and receives normal traffic without client port-
based authentication.
• Force Unauthorized: Denies the selected interface system access by moving the
interface into unauthorized state. The switch cannot provide authentication services
to the client through the interface.
Defines the amount of time that the switch remains in the quiet state following a failed
authentication exchange. The possible field range is 0-65535. The field value is in
seconds. The field default is 60 seconds.
D-Link Unified Access System
Port Access Control Page 385