Software User Manual
12/10/09
Field
Host Name
Inet Address
Remove
•
Click Add Static Entry to load the Host Name IP Mapping Configuration page in order to configure the Host Name IP
Mapping entries.
Field
DNS Dynamic Entries
Host Name
Total
Elapsed
Type
Addresses
Remove
•
Click Submit to apply the new configuration and cause the change to take effect immediately. These changes will not
be retained across a power cycle unless a Save is performed.
•
Click Clear Dynamic Entries to remove all Host Name IP Mapping entries. A confirmation prompt will be displayed.
Click the button to confirm removal and the Host Name IP Mapping dynamic entries are cleared.
•
Click Refresh to refresh the page with the most current data from the switch.
Document
34CSFP6XXUWS-SWUM100-D7
Table 79: DNS Host Name IP Mapping Summary Fields (Cont.)
Description
The host name of the static entry.
The IP4 or IPv6 address of the static entry.
Select to remove a Host Name IP Mapping entry from the Host Name IP Mapping list.
Description
The host name of the dynamic entry.
The total time of the dynamic entry.
The elapsed time of the dynamic entry.
The type of the dynamic entry.
The IP4 or IPv6 address of the dynamic entry.
Select to remove a Host Name IP Mapping entry from the Host Name IP Mapping list.
D-Link Unified Access System
Configuring DNS
Page 165