Huawei UPS2000-G User Manual page 106

UPS2000-G-(6 kVA–20 kVA)
User Manual (Lead-Acid Battery)
Issue 23 (2024-03-15)
NO TE
The battery sharing setting is available only for the UPS2000-G-15KRTL-01/UPS2000-
G-20KRTL-01. Battery sharing is enabled for the UPS2000-G-6KRTS/UPS2000-
G-10KRTS/UPS2000-G-15KRTL/UPS2000-G-20KRTL by default.
Figure 5-35 Basic screen (UPS2000-G-6KRTS/UPS2000-G-10KRTS/UPS2000-
G-15KRTL/UPS2000-G-20KRTL)
Table 5-26 Basic screen (UPS2000-G-6KRTS/UPS2000-G-10KRTS/UPS2000-
G-15KRTL/UPS2000-G-20KRTL)
Item Description
Positive Set the number of batteries.
(Negative When the number of
) batteries batteries
the system output power is
derated by
mode. The parameter is
configurable in non-
battery mode or non-
battery ECO mode. You
need to set the number of
batteries on the UPS2000-
G-6 kVA/10 kVA, and set
two battery strings (positive
and negative) on the
UPS2000-G-15 kVA/20 kVA.
Battery Set the battery capacity.
capacity This parameter indicates the
sum of all battery
capacities. Set the
parameters based on the
actual battery capacity. The
parameter is configurable
in non-battery mode or
non-battery ECO mode.
Copyright © Huawei Digital Power Technologies Co., Ltd.
N is less than 20,
N /20 in battery
5 Control Panel
Default Value Value Range
0 16–20
6 kVA standard 7–1000 Ah
backup time
model: 7 Ah
6 kVA long
backup time
model: 40 Ah
10 kVA
standard
backup time
model: 9 Ah
10 kVA long
backup time
model: 65 Ah
15 kVA/20 kVA
long backup
time model: 65
Ah
98