Siemens SICHARGE UC Installation And Commissioning Manual page 51

Hide thumbs Also See for SICHARGE UC:
Table of Contents

Advertisement

SICHARGE UC MastHood
5.3 Connection
Connection of the foundation grounding electrode
No.
1
Remove the screws and clamping plates of the connection terminal
2
Cut the foundation grounding electrode to the correct length
3
Clean the clamping surface of the foundation grounding electrode
4
Place the foundation grounding electrode in the clamp
5
Mount the clamping plates
6
Tighten all screws with the corresponding tightening torque
7
Measure and write down the value of the earth loop impedance:
Connection of the protective conductor
No.
1
Remove the screw from the grounding plate
2
Cut the protective conductor to the correct length
3
Remove the sheath of the cable to connect the cable lug
4
Choose a cable lug for the appropriate conductor cross-section
5
Strip the insulation from the end of the cable so that the remaining insulation extends up to the
cable lug
6
Fasten the cable lug correctly to the end of the conductor using a suitable crimping tool
7
Screw the cable lug of the protective conductor to the ground connection
8
Tighten the screw with the corresponding tightening torque
9
Measure and write down the value of earth loop impedance:
Connection for the low voltage cable/AC
No.
1
Pull the socket out of the plug.
2
Open the socket.
3
Remove the jacket of the low voltage cable/AC to a length of approx. 5 cm.
4
Insert the connection cable into the enclosure.
5
With a flexible cable, select the wire end sleeves for the corresponding conductor cross section.
6
Strip the ends of the conductors so that the remaining insulation reaches up to the wire end
sleeve.
7
Fasten the wire end sleeves properly on the conductor ends.
8
Clamp the protective conductor into the ground terminal.
9
Clamp the L conductor into the L terminal.
10
Clamp the N conductor into the N terminal.
11
Check the connections of the conductors to the terminals.
12
Tighten the clamps with a torque of 0.25 Nm.
13
Close the enclosure of the socket.
14
Insert the socket into the plug.
50
Checklist item
Checklist item
Checklist item
Installation and Commissioning Checklist for SICHARGE UC
Product Information, 03/2023, A5E52548271-AA
P
F
N/A
P
F
N/A
P
F
N/A

Advertisement

Table of Contents
loading

Table of Contents