Connecting the auxiliary power supply
①
②
③
Figure 3-8
Connecting the auxiliary power supply
No.
1
Strip the insulation from the end of the conductor so that the remaining insulation extends up to
the ferrule.
2
Properly attach the wire end ferrule to the conductor end.
3
Connect the L conductor of the cable to the terminal "-FC30:2".
4
Connect the N conductor of the cable to the terminal "-FC30:4".
Installation and Commissioning Checklist for SICHARGE UC
Product Information, 03/2023, A5E52548271-AA
Opening for the cable gland
Terminals for the auxiliary power supply
Cable for the 230 V AC auxiliary power supply
Cable routing for the auxiliary current
Checklist item
SICHARGE UC Charger
3.3 Connection
P
F
N/A
☐
☐
☐
☐
☐
☐
☐
☐
☐
☐
☐
☐
19