Siemens SICHARGE UC Installation And Commissioning Manual page 46

Mounting the SICHARGE UC MastHood
No.
1 Transport the SICHARGE UC MastHood to the base area
2 Position the SICHARGE UC MastHood over the threaded rods on the base area
3 Open the maintenance door with the 8 mm triangular key
4 Loosen the 3 screws of the plastic cover and remove the cover
5 Guide any underground cables into the mounting base of the SICHARGE UC MastHood
6 Ensure that the SICHARGE UC MastHood is correctly aligned with the threaded rods of the base
area
7 Lower the SICHARGE UC MastHood onto the base area
8 Put the washers on the threaded rods
9 Screw the nuts onto the threaded rods
10 Align the SICHARGE UC MastHood on the threaded rods
11 Tighten the nuts with a torque of 550 Nm
12 Turn the lock nuts slightly away from the nuts
13 Apply a screw lock to the threaded rods
Installation and Commissioning Checklist for SICHARGE UC
Product Information, 03/2023, A5E52548271-AA
Checklist item
SICHARGE UC MastHood
5.2 Installation
P F N/A
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
45