Table of Contents
Advertisement
2.5 General safety instructions
• Observe the valid regulations on accident prevention and environmental protection.
• Observe the safety regulations and provisions of the country in which the product
is used/applied.
• Exclusively use Rexroth products in technically perfect condition.
• Observe all notices on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products
must not consume any alcohol, drugs or pharmaceuticals that may affect their
ability to react.
• Only use accessories and spare parts approved by the manufacturer in order to
exclude hazards to persons due to unsuitable spare parts.
• Comply with the technical data and environmental conditions specified in the
product documentation.
• The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating conditions when being used which in turn
could cause personal injuries and/or damage to property. Therefore, only use
a product for safety-relevant applications if this use is expressly specified and
permitted in the documentation of the product, e.g. in explosion-protected areas or
in safety-related parts of control systems (functional safety).
• Do not commission the product until you can be sure that the end product
(for example a machine or system) where the Rexroth product is installed complies
with the country-specific provisions, safety regulations and standards of the
application.
• Only persons who have been authorized by the machine end-user may be granted
access to the direct operating range of the machine/system. This also applies
during any standstill of the machine/system.
Safety instructions 13/128
CytroBox, RE 51057-B/11.19, Bosch Rexroth AG
Advertisement
Table of Contents
