Bosch rexroth CytroBox Operating Instructions Manual page 4

4/128
Bosch Rexroth AG, CytroBox, RE 51057-B/11.19
7.4 Water supply connection
7.5 Electrical interface assignment
7.5.1 Voltage supply feed-in assignment
7.5.2 Interface 20X1 assignment: Digital input and output signals
7.5.3 Interface 21X1 assignment: Safe Torque OFF (STO)
7.5.4 Interfaces 22X1 and 22X2: Multi-Ethernet
control communication as well as 30X1: CytroConnect
7.5.5 Interface 23X2 assignment: Connection of
cooling unit and 23X3: Water valve connection (optional)
7.5.6 Interface X26 assignment
7.6 Electrical interface connection
8 Commissioning
8.1 First commissioning
8.1.1 Before commissioning
8.1.2 Filling of the hydraulic power unit
8.1.3 Switching on the power supply
8.1.4 Bleeding the entire hydraulic system of the machine
8.1.5 Commissioning of the "hydraulics"
8.1.6 Flushing the hydraulic system
8.1.7 Common errors during commissioning
8.1.8 Commissioning of the "electronics"
8.2 Re-commissioning after longer standstill
9 Operation
10 Maintenance and repair
10.1 Cleaning and care
10.2 Inspection
10.3 Warning devices
10.4 Maintenance schedule
10.5 Maintenance
10.5.1 Checking the electric components/installation
10.5.2 Filling level monitoring
10.5.3 Monitoring the oil temperature
10.5.4 Monitoring the filter element contamination (pressure filter)
10.5.5 Visual inspection of the air filter
10.5.6 Checking the pressure values
10.5.7 Hydraulic fluid care
10.5.8 Visual inspection for leakage, cracking, force effects and corrosion
10.6 Spare and wear parts
11 Decommissioning
11.1 Preparing for decommissioning
11.2 Decommissioning process
12 Disassembly and replacement
12.1 Preparing disassembly
12.2 Disassembly process
13 Disposal
13.1 Environmental protection
14 Extension and modification
64
65
65
66
67
68
69
69
70
71
71
71
71
73
73
73
75
76
77
96
97
98
98
99
99
100
100
100
101
101
102
103
103
103
104
105
108
108
108
109
109
109
110
110
111