Table of Contents
Advertisement
10/80
CytroPac | Safety instructions
Bosch Rexroth AG, Edition 07.2022, RE 51055-B
2�5 General safety instructions
• Observe the valid regulations on accident prevention and environmental
protection.
• Observe the safety regulations and provisions of the country in which the
product is used/applied.
• Only use Rexroth products in technically perfect condition.
• Observe all notes on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products
must not consume any alcohol, drugs or pharmaceuticals that may affect their
ability to react.
• Only use accessories and spare parts approved by the manufacturer in order to
exclude hazards to persons due to unsuitable spare parts.
• Comply with the technical data and environmental conditions specified in the
product documentation.
• The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating conditions when being used which in turn
could cause personal injuries and/or damage to property.
Therefore, only use a product for safety-relevant applications if this use is
expressly specified and permitted in the documentation of the product, or if
the safe suitability of the product in the application is confirmed by a separate
conformity assessment procedure for the end product, e.g. in explosion
protection zones or in safety-related parts of control systems (functional safety).
• Do not commission the product until you can be sure that the end product
(for example a machine or system) where the Rexroth product is installed
complies with the country-specific provisions, safety regulations and standards of
the application.
• Only persons who have been authorized by the machine end-user may be granted
access to the direct operating range of the machine/system. This also applies
during any standstill of the machine/system.
Advertisement
Table of Contents
