Table of Contents
Advertisement
82/128 Commissioning
Service mode
Bosch Rexroth AG, CytroBox, RE 51057-B/11.19
2. Configuration of the communication to IndraDrive
To this end, you must at first activate the service mode as described in chapter 5.3.4
"Fixed command value memory". It is also indicated on the display of the drive
controller, see Fig. 7, pos. 16 on page 50. The command values for pressure and
speed can then be specified via the appropriate parameters. Then the CytroBox can
be activated via the easy startup mode. This mode is very well suited for initial
commissioning in order to put the system under pressure independently of the set
field bus communication. Moreover, the system can be bled in this mode.
Fig. 27: Easy startup mode
Advertisement
Table of Contents
