Table of Contents
Advertisement
26/128 Product information
Application software
Service interface
Bosch Rexroth AG, CytroBox, RE 51057-B/11.19
The application software enhances the basic functionality of the firmware. It includes
the platform software IMC (Injection Molding Control) and an enhanced HPU
(Hydraulic Power Unit).
The following figure shows the rough structure of the application software which is
incorporated into the drive controller by means of the soft PLC function (MLD) of
the drive controller firmware.
Fig. 3: Structure of the application software
In conjunction with the drive controller, the application software represents the
central control unit. Its main task is the control and regulation of the CytroBox and
its diagnosis.
Version of the application software used:
FWS-MLDSYX-IMC02VRS-D0-MP20-HPU02VRS-NN
In connection with the PC-based IndraWorks DS service and commissioning tool,
setting, process and diagnostic data can be fed or read out and software updates can
be performed via the service interface X26 (in the electrical cabinet of the CytroBox).
The connection to the PC can be established by a standard RJ45 Ethernet cable.
Advertisement
Table of Contents
