Table of Contents
Advertisement
For lifting and transport of the hydraulic power unit, proceed as follows:
1.
Make sure that the lifting gear's lifting capacity is sufficiently dimensioned in
order to safely bear the weight of the hydraulic power unit.
Use the pre-assembled eyebolts at the hydraulic power unit for transport,
2.
see Fig. 12.
3.
Make sure that the eyebolts are securely tightened.
4.
Make sure that during transport, all doors are closed.
5.
Attach a suitable lifting gear to the eyebolts.
Attach the lifting gear to a crane hook.
6.
7.
Slowly and carefully lift the hydraulic power unit in order to avoid swinging.
Fig. 12: Eyebolts
When attaching the lifting gear, make sure the angle is correct,
see DIN 580 (ring bolts) and DIN 818-4 (chains).
1
CytroBox, RE 51057-B/11.19, Bosch Rexroth AG
Transport and storage 57/128
1
Advertisement
Table of Contents
