Table of Contents
Advertisement
26/80
CytroPac | Assembly
Bosch Rexroth AG, Edition 07.2022, RE 51055-B
7 Assembly
7�1 Unpacking the hydraulic power unit
▶ Only open the packaging from the top.
▶ Before opening the packaging and/or loosening the tension belts,
make sure that the hydraulic power unit cannot fall over.
▶ Remove the packaging of the hydraulic power unit.
▶ Check the hydraulic power unit for obvious defects, for example transport
damage, leakage or other external damage, and for completeness.
see chapter 4 "Scope of delivery".
▶ Use the hydraulic power unit only in technically perfect condition.
▶ Dispose of the packaging material in accordance with the national regulations
in your country and/or your company-internal specifications/procedures.
7�2 Installing the hydraulic power unit
Falling, tumbling or uncontrolled position change of the hydraulic power unit!
Risk of injury! Damage to property!
▶ Make sure that the hydraulic power unit is only installed and assembled by
qualified personnel. See chapter 2.4 "Qualification of personnel".
▶ Observe the information on handling the product in chapter 6
"Transport and storage".
▶ Position the hydraulic power unit on a suitable foundation.
▶ Observe the specifications on the total weight.
Damage to the surface/oil tank due to rough handling and incorrect positioning!
Damage to property!
▶ Make sure that the hydraulic power unit is correctly positioned.
▶ Make sure that the clip of the assembly aid is correctly positioned.
See also Fig. 9 and 10.
Vibrations in the environment!
Damage to property!
▶ Use vibration dampers like damping mats.
▶ Connect the hydraulic power unit to the machine via hydraulic hoses.
Do not use any rigid pipelines.
WARNING
NOTICE
Advertisement
Table of Contents
