Storing The Hydraulic Power Units; Assembly And Installation; Unpacking - Bosch Rexroth RE 07009-MON General Assembly Instructions

14/20 Bosch Rexroth AG
Storage conditions
Storage in dry rooms at
constant temperature
Outdoor storage
(protect the product against
damage and water ingress)
Inspection with protective agent
Filling with protective agent
CAUTION!
Assembly Instructions for Hydraulic Power Units | RE 07009-MON/11.17
5.2

Storing the hydraulic power units

Observe the storage times specified in Table 2.
If the storage time exceeds the values specified, flush the hydraulic power unit
f
before commissioning using a suitable flushing fluid. The flushing procedure
should be carried out as described in Chapter 7.1.9 "Flushing the hydraulic
system" of the operating instructions.
If necessary, replace the components for which a maximum storage time is
f
specified e.g. hoses, compensators, accumulators.
Table 2: Storage times
Protective
Packaging
agent
A
For carriage
overseas
B
A
Not for carriage
overseas
B
A
For carriage
overseas
B
A
Not for carriage
overseas
B
A = Mineral oil
B = Corrosion protection oil

6 Assembly and installation

This chapter describes the assembly of the product at its place of use as well as
the connection of the product to the hydraulic system, the electrical systems and
the water supply of the machine.
For information regarding the installation into the complete machine, particularly
regarding its overall function and logic mode of operation, please refer to the
instructions and/or the documentation for the complete machine.
Risk of personal injury and damage to property!
A basic knowledge of hydraulics is required for assembling the hydraulic power
unit.
Only qualified personnel (see Chapter "2.3 Personnel qualifications") are
f
permitted to assemble the hydraulic power unit.
6.1

Unpacking

Remove the product packaging.
f
Dispose of the packaging material in accordance with the national regulations
f
in your country and/or your company-internal specifications/procedures.
Storage time in months
Test with the protective agent
12
12
9
12
6
9
0
6
Filling with the protective agent
24
24
24
24
12
24
12
24