All Configurations - Bosch Rexroth CytroPac Operating Instructions Manual

Hydraulic power unit
Hide thumbs Also See for Rexroth CytroPac:
Table of Contents

Advertisement

52/80
CytroPac | Assembly
Bosch Rexroth AG, Edition 07.2022, RE 51055-B
To connect the power supply, proceed as follows:
▶ Connect the connector plug for the 24 V interface to the higher-level machine
control via port 15X1, see Fig. 25, item 9.
▶ Connect the connector plug for the feed-in / power supply to connection 12X1,
see Fig. 25, item 5.
▶ Connect the connector plug for the multi-Ethernet interface to the higher-level
machine control via port 21X1, see Fig. 25, item 6.
– Only use connectors that ensure protection class IP67, see chapter 7.6.4,
"Ports 21X1 and 21X2: Multi-Ethernet interfaces".
When using a standard Ethernet connector, the latching function is not
provided and the IP67 rating is not reached.
In the "Premium" and "Premium M12" configurations, the warning and
shutdown signals are internally wired and evaluated via port 16X1. The status is
visualized via the flashing sequence and color of the integrated LED strip.
For further information on the meaning of the LED signals, see chapter 10.3
"Warning devices".
▶ Close any unused interfaces with the respective protective cap.
7�7�3 All configurations
To connect the mini-USB service interface, proceed as follows:
▶ Connect the hydraulic power unit to an external PC via the mini-USB service
interface using a mini USB cable.
Bosch Rexroth recommends using a shielded cable with ferrite core, as this is
less sensitive to interference. Bosch Rexroth offers a suitable mini USB cable.
For a complete list of accessories, see data sheet 51055, see chapter 1.2
"Required and amending documentation".
The EFC 5610 frequency converter from Rexroth is integrated into the
hydraulic power unit. With the IndraWorks Ds software you can access the
frequency converter and thus read out diagnostic messages of the frequency
converter as well as set parameters, save, load and perform measurements.
You can download the IndraWorks Ds software from the website
www.boschrexroth.com/indraworks
For further information, see the commissioning instructions 51055-IB,
see chapter 1.2 "Required and amending documentation".
- Download.

Advertisement

Table of Contents
loading

Table of Contents