Table of Contents
Advertisement
7�3�2 Connecting the hydraulic supply in master/slave operation
Hydraulic power units, which have been ordered as version with option A1,
have an additional oil tank connection T: G1, see Fig. 10, item 3. This oil tank
connection is located next to pressure port P and is delivered closed with a plug
screw including centering ring.
To connect two hydraulic power units for master/slave operation, proceed as
follows:
1� Connect the oil tanks via the oil tank connections T: G1 of the two
hydraulic power units with a hose line so that the oil level can be compensated.
– Use suitable screw-in connections for this purpose.
Fig� 11: Representation of the balancing hose
Assembly | CytroPac
RE 51055-B, Edition 07.2022, Bosch Rexroth AG
33/80
Advertisement
Table of Contents
