Handling The Checksum When Working With The Sfe Tool - Bosch Rexroth SMART Flex Effector Manual

52
6.3.3

Handling the checksum when working with the SFE tool

As standard, the SFE tool attaches the checksum Modbus CRC16 to every command and checks the
response of the SFE unit for correctness using the checksum.
Important note!

The checksum which is attached to the command by the SFE tool is not displayed in the SFE
tool console. In addition, the checksum of the response attached by the SFE unit is also not
shown in the console.
en
Interface description
6