41
Screen
12
Recording measurements
5.9
Viewing and exporting service data
Screen
13
Viewing and exporting service data
en
Desktop software: SFE tool as a file for download
Action steps
Note
This option should be used for long-term
measurements, as otherwise this can
lead to too high a load when visualizing
the measurement data.
Action steps
Navigate to the Service (1) tab.
Click Update to open the error log (2).
When you activate the checkbox Auto
Update Service Data, the service data (first
line on the screen – run time etc.) is
continually updated (3).
If necessary, click Export (.pdf) (4) to
export the service data.
Note
If the baud rates are low, updating the
error log can take longer.
5