Table of Contents
Advertisement
5
42
Desktop software: SFE tool as a file for download
5.10
Using the testcases
The structure of Testfiles in .json format is explained using the following examples.
Using the testcases
The entire test process must be placed in square brackets. Individual test stages are written in curly
brackets and separated from one another using commas. After "type": the user sets whether this is a
comment or a test stage. Once the designation of the test stage has been stated after "name":, the
command to be tested can be determined after the label "test":. The command return is compared with
the expected result after "regex":. If these match, the test was successful and appears in green in the
SFE tool. If the return does not match the expected result, the test has failed and is marked red.
en
Advertisement
Table of Contents
