4.
Verify the Hydran 201 sensor's serial number and parameters in the H201Ti's
Service;SensorCal Data submenu (Section 4.5.4.1 on page 4-18).
5.
Execute the H201Ti's ForceSensor Test command (Relays/Analog submenu) to test
the sensor operation.
6.
Verify the parameters pertaining to the sensor temperature (Temperature submenu).
7.
Consult General Electric Canada to optimize the value of the parameters and the
location of the H201 sensor.
12.5.7
Gas Level Reading Is Abnormally High
See Section 12.1.9 on page 12-7.
12.5.8
Gas Level Reading Is Slowly Decreasing Toward Zero
See Section 12.1.15 on page 12-9.
Part 17997
Rev. 6, March 2011
Alarms
12-19