Caller Id Display - Samsung OfficeServ 500 Programming Manual

[119] CALLER ID DISPLAY

Allows the technician to set the individual station display preference on a per station basis.
Caller ID or CLI can be selected to either show the name, number first, or no display
depending on the type of call. Caller ID or CLI displays have the following options:
No
0 NO DISPLAY
1 NUMBER FIRST
2 NAME FIRST
CONDITIONS
NONE
DEFAULT DATA
NUMBER FIRST
ACTION
1) Press Transfer button and enter 119.
Display shows first station:
2) Enter station number.(e.g., 205)
OR
Press Volume button to scroll through stations
and press Right Soft button to select a station.
OR
Press ANS/RLS button to select all and press
the Right Soft button..
3) Dial display option 0, 1 or 2.(e.g., 2)
OR
Press Volume button to select option and press
Right or Left Soft button to return to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to save and advance to next MMC.
© SAMSUNG Electronics Co., Ltd.
Type
No Caller ID or CLIP data will be displayed.
The Caller ID or CLIP number received from the Central Office
will be displayed first.
The Caller ID or CLIP name received will be displayed first.
In the case of CLIP the number must be programmed in the
CLIP translation table(MMC 728). CLIP does not provide names.
OfficeServ 500 Programming Guide
Description
DISPLAY
[201] CID DISP
NUMBER FIRST
[205] CID DISP
NUMBER FIRST
[ALL] CID DISP
NUMBER FIRST
[205] CID DISP
NAME FIRST
2-35