Samsung OfficeServ 500 Programming Manual page 385

Hide thumbs Also See for OfficeServ 500:

Table of Contents

1) Press Transfer button and enter 816.

Display shows:

2) Press Volume button to make selection and

press Right Soft button to make change and

to move cursor.

3) Dial 3,4 or 5.(e.g., 4 part conference bridge)

Press Volume button to make selection and

press Right Soft button to move cursor.

4) Dial 0 to 4.(e.g., 2 analog trunk member)

Press Volume button to make selection and

press Right Soft button to move cursor.

5) Press Volume button to select CNF gain and

press Right Soft button to move cursor.

6) Press Volume button to select SW gain and

press Right Soft button to save and move cursor.

7) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.

Table of Contents