Item Cost Table - Samsung OfficeServ 500 Programming Manual

[760] ITEM COST TABLE

This MMC provides a means to assign a code to a billable item along with a 10 character
name for the item. There are a maximum of 100 entries(00 to 99) in the table with item 00
reserved as the code for room deposits, 01 reserved as the code for phone deposits and
items 89 to 99 are reserved for other PMS stream items.
These item codes with the exception of codes 93 to 99 will appear on the guests bill at
checkout and will serve to identify what each charge on the bill is for. The room bill, when
printed will also show telephone calls with an item designation of TEL and the name field
will show the number dialed. In addition to the name up to 8 of the tax codes or rates
defined in MMC 761 can be applied to each item.
PRE DEFINED CODES
No
Room Deposit
01 Phone Deposit
02-88 -
89 W/UP SET
90 W/UP ANS
91 W/UP N/ANS
92 W/UP CANCL
93 Check In
94 Check out
95 Available
96 Occupied
97 Clean Room
98 Fix Room
99 Hold
CONDITIONS
This function can be used only when the hotel function is enabled at 'MMC 813 HOTEL
OPERATION'
.
INPUT CHARACTERS
Refer to 'INPUT CHARACTERS' in 'MMC [104] STATION NAME'.
DEFAULT DATA
NO ENTRIES
© SAMSUNG Electronics Co., Ltd.
Code
This is the code used for pre pay room deposits.
This is the code used for pre pay phone deposits
User Assignable Code
A wake up call was set
A wake up call was answered
A wake up call was not answered
A wake up call was cancelled
A guest has checked into a room
A guest has checked out of a room
A room has been flagged as Available
A room has been flagged as Occupied
A room has been flagged as needs cleaning
A room has been flagged as need maintenance
A room has been flagged as hold
OfficeServ 500 Programming Guide
Description
2-315