Dect Registration On/Off - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[746] DECT REGISTRATION ON/OFF

Allows DECT handset registration to be enabled on a system. If this MMC is not opened
and an attempt is made to register a DECT handset, an error message will be displayed.
The default passcode can be changed using MMC 202.
CONDITIONS
NONE
DEFAULT DATA
DISABLE
ACTION
1) Press Transfer button and enter 746.
Display shows:.
2) Enter passcode.
If the correct code is entered the display shows.
If the SYSTEM ID in MMC 740 has not been set,
the following message will be displayed.
3) Dial 1 for ENABLE or 0 for DISABLE.
OR
Press Volume button to select and press
Right Soft button.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 740
MMC 741
MMC 743
MMC 744
MMC 745
MMC 747
2-294
DECT SYSTEM CODE
DECT CLEAR REGISTRATION
DBS RESTART
BSI STATUS
DBS STATUS
BSI RF CARRIER
DISPLAY
ENABLE DECT REG.
PASSCODE:_
ENABLE DECT REG.
PASSCODE:****
ENABLE DECT REG.
DISABLE
ENABLE DECT REG.
NO REG.SYSTEM ID
ENABLE DECT REG.
ENABLE
© SAMSUNG Electronics Co., Ltd.