System Timers - Samsung OfficeServ 500 Programming Manual

[501] SYSTEM TIMERS

Allows the technician to adjust individual timers as necessary.
TIMER TABLE
Timer Name
AA INT DGT TIME
AA NO ACT TIME
AA TRANS TIME
ALARM TIME
ALERT TONE TIME
ALM REM.INTERVAL
ALM REM RING OFF
ATT. RECALL TIME
AUTO REDIAL INT.
AUTO REDIAL RLS.
© SAMSUNG Electronics Co., Ltd.
Default Range Unit
5 1-25 SEC When the AA card is installed, this timer
determines the inter digit time for AA call
processing. If this timer expires before valid
digits are received by the AA card, the call will
be routed to the AA invalid digits destination.
10 1-25 SEC When the AA card is installed, this timer
determines the time that the AA card will wait
for a first digit for AA call processing. If this
timer expires before a digit is received, the
call will be routed to the AA no action
destination.
2 0-25 SEC After this timer, the system will compare
received digits from AA card with the AA
translation table entry and transfer to the
proper destination.
100 0-2500 MIN This is the time the system alarm key will start
ringing after the alarm key has been silenced.
1000 100-2500 This timer sets the duration of the attention
MSEC tone preceding a call to a phone in the Voice
Announce or Auto Answer mode. This tone
will also precede a forced Auto Answer call.
25 1-250 SEC This timer controls the time length between
ring attempts at a station when alarm
reminder is set.
10 1-25 SEC This timer controls the length of the ring cycle
duration when alarm reminder is set at a
station.
30 0-250 SEC This is the length of time a transfer recall will
ring at a station before recalling the operator.
30 1-250 SEC This timer controls the time between attempts
after RETRY dialling is set on a station.
45 1-250 SEC This timer controls the duration of a Ring No
Answer condition on a retry number dialed
before the auto redial is automatically cancelled.
OfficeServ 500 Programming Guide
Description
2-161