Samsung OfficeServ 500 Programming Manual page 208

CHAPTER 2. Ошибка! Стиль не определен.
Timer Name
TSW CONN. DELAY
UCDS AUDIO
ALARM
UCDS VISUAL
ALARM
VMS UCD MSG
TIME
VOICE DIAL DELAY
VOIP RE-ROUTE TM
When the value is '0'
Certain timers are disabled when the value is '0'.
CONDITIONS
NONE
DEFAULT DATA
SEE DESCRIPTION
SOME TIMERS ARE DEPEND ON COUNTRY
2-166
Default Range Unit
0 0-10 SEC
0 0-990 SEC
0 0-990 SEC
5 1-99 SEC
8 5-15 SEC
5 2-25 SEC
Description
When incoming trunk makes outgoing call
to another trunk, the system connects
voice path after this time.
When an AA card is installed and the digital
UCD package enabled, this counter
determines the maximum number of seconds
a call has been waiting at the UCD group
before the UCD group's SUPV key begins to
flash along with an audio alarm. For more
UCD alarm conditions, see MMC 500.
When an AA card is installed and the digital
UCD package enabled, this counter
determines the maximum number of
seconds a call at the UCD group before
the UCD group's SUPV key begins to flash
as an alarm. For more UCD alarm
conditions, see MMC 500.
When this timer expired, the call return to
idle member. Requires SVM-800.
This timer monitors the duration of
interaction between main software and
Voice Dialler. If there is no response from
Voice Dial card within this time, the system
decide the voice dialling is fail.
When the outgoing call is made via VOIP
trunk and does not receive ACK message
from called party within this time, the call is
treated as fail.
© SAMSUNG Electronics Co., Ltd.
(Continued)