Disassembling The Crane Transport Assembly - Siemens SINAMICS S120 Manual

Mechanical installation
3.3 Installing
Failure to observe the weight and the center of gravity
The non-observance of restrictions concerning the weight and the center of gravity can
cause death or severe injury during lifting and transport activities.
• The weight specified on the packaging and the designated center of gravity must always
• This potential hazard must be taken into account particularly once you have unscrewed
Center of gravity of the cabinet
The diagram below shows the center of gravity of the cabinet (for all sizes), which must
always be taken into account when lifting and installing the cabinet.
Figure 3-8
Note
Center of gravity of the cabinet
A sticker with the precise position of the center of gravity of the cabinet is attached to all
cabinets/transport units.
3.3.4

Disassembling the crane transport assembly

With option M90 (crane transport assembly), the Cabinet Modules are equipped with either
transport eyebolts or mounting rails.
With option Y11 (assembly into transport units in the factory), the Cabinet Modules are
always equipped with a mounting rail.
Figure 3-9
56
WARNING
be taken into account when the cabinet is lifted and transported.
the cabinet units from the transport pallet.
Center of gravity of the cabinet
Option M90 / Y11, mounting rails
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A