Maintenance and servicing
7.5 Replacing components
7.5.10.7
Replacing the electronic fan of the Control Interface Module
Replacing the electronic fan of the Control Interface Module
①
②
③
④
Figure 7-24
Preparatory steps
● Disconnect the drive line-up from the power supply
● Allow unimpeded access
● Remove the protective cover
● Remove the Control Interface Module of the corresponding device (see the relevant
description)
294
Slot for the fan power supply for versions equipped with an electronic fan
Fixing screws for the first electronic fan
Slot for the fan power supply for versions equipped with two electronic fans
Fixing screws for the second electronic fan
Replacing the electronic fan of the Control Interface Module
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A