GE Vivid T8 Basic Service Manual page 286

Replacement Procedures
8-4-7-1 Loading the System Software with USB memory stick(continued)
8-28
12. When the system reboots, the Installation Wizard page
shows. You can configure the system settings or exit. For
detailed process, please refer to
on page 8-34.
13. If Upgrade the Whole Disk is selected, you are required to
input the serial number when you reboot the system. After
you press OK, the system will shut down automatically.
Figure 8-17. Input Serial Number
14. After you power on the system, it will need you to input the
backup option key, and then press OK.
Figure 8-18. Input Option Key
8-4-13 'Installation Wizard'
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3