GE Vivid T8 Basic Service Manual page 153

Group mapping
Figure 3-63. The Advanced LDAP configuration screen of the LDAP sheet
NOTE:
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3
Map LDAP groups to system groups. An LDAP group can be mapped to
zero or more system groups. Several LDAP groups can be mapped to
the same system group.
To define the LDAP properties:
1. Enter the configuration properties.
2. Press Connect to test the connection and enter a valid user
name and password for the LDAP server in the dialog that
appears.
3. Define group mapping for the LDAP user groups that shall
be grant users access to the system.
The user will be assigned one or more system groups according
to the group mapping and which of these LDAP groups the user
is a member of.
If the Directory Server does not support anonymous connection
for the authentication service, two step authentication is needed.
Then valid user credentials for a user with access to the
Directory Server must be entered here.
The user credentials will be stored on the system unencrypted.
Connectivity setup
Definition
3-73